Skip to content
Production tracking software

Production tracking software: where is the work order, what was made, how much scrap?

In EPROX ERP the operator starts the job on the KEOS terminal at the workstation and reports output and scrap. Work order status, workstation load and actual cost appear in the ERP without waiting for paper job sheets.

  • Work order and operation status
  • Output, scrap and downtime
  • Terminal that works offline
Work order screen on a KEOS touchscreen workstation terminal
Why

Why paper job sheets and spreadsheets are not enough

In many workshops production is tracked with job sheets filled in at the end of the shift and typed into a spreadsheet the next day. Meanwhile the planner decides without knowing which job is finished, which workstation is waiting and how much scrap there was.

Production tracking software closes this gap: information is entered while the work is being done, where it is done, and reaches the work order, stock and cost at the same moment. In EPROX ERP tracking is not a separate program; it runs in the same database as planning, stock and costing.

In EPROX ERP

What you track live

Work order status

Planned → Released → In Production → Completed; transitions are validated on the server.

Operation tracking

Waiting → Running ⇄ Paused → Completed; start and finish times are recorded automatically.

Output and scrap

Quantity and scrap reason are entered on the job; scrap report by workstation.

Downtime

Downtime and its reasons are recorded; the basis for efficiency measurements.

Ayrıntılar

Machine data

The Field Gateway reads counters and process values over Modbus TCP; read-only on machines by default.

Ayrıntılar

Workstation status

Which workstation is on which job, who is working, how much is left; live on the management screen.

Plant manager dashboard: open and late orders, running workstations, scrap
Dashboards

What the plant manager sees at a glance

The setup wizard installs the Production Planning and Plant Manager dashboards together with the production module. Dashboards are role-based; your ERP Administrator changes them without writing code.

  • Open and late orders
  • Running workstations and operations
  • Workstation queues and load
  • Weekly / monthly output
  • Scrap by workstation
Flow

Where does information entered in the workshop go?

  1. 1

    The job starts

    The operator selects the job on the KEOS terminal or scans its barcode; when the first operation starts the order becomes "In Production".

  2. 2

    Output and scrap are reported

    The quantity made is written on the job together with the scrap reason; downtime is recorded with its reason.

  3. 3

    An urgent job cuts in

    The current job is put on hold, the urgent job is started, then work resumes where it left off.

  4. 4

    The order is completed

    When the last operation finishes, raw materials (including scrap) are deducted from stock and the finished product is received.

  5. 5

    The cost is finalised

    Planned and actual raw material + labour cost and the variance percentage are calculated.

Frequently asked questions about production tracking software

What happens if the internet goes down in the workshop?

The KEOS terminal keeps working; it stores the records and sends them in order, without duplicates, when the connection returns. The Field Gateway also holds measurements while it cannot reach the ERP.

Does the terminal need special hardware?

Industrial panels and tablets that can run a browser can be used. We choose suitable hardware for your environment together.

Is data written to our machines?

Not by default; the Field Gateway only reads from machines.

Is there a ready-made OEE dashboard?

There is no ready-made OEE dashboard. Output, scrap and downtime data are collected; efficiency reports and dashboards such as OEE are set up for your company with the design module.

How is it different from production planning software?

Planning decides what is made, when and at which workstation; tracking shows what actually happens in the workshop. In EPROX ERP both are in the same system: production planning software.

Free demo

See your workshop with your own work orders

Let's take one of your work orders as an example and show starting it on the terminal, reporting output and scrap, and how it appears on the dashboard.

  • 30–45 minute online or on-site demo
  • Sample setup for your industry
  • Using your own bills of materials and orders
  • No obligation to buy

If you prefer not to fill in the form, call us on +90 212 728 01 03 or message us on WhatsApp.

Demo request

Fields marked with an asterisk are required.

Chat on WhatsApp